path: root/ChangeLog

2015-06-14  Arthur de Jong <arthur@arthurdejong.org>

	* [4236dd6] Makefile.am: Correctly insert emtpy lines in ChangeLog

2015-06-13  Arthur de Jong <arthur@arthurdejong.org>

	* [e916a2b] man/nslcd.conf.5.xml: Manual page improvements

2015-06-13  Arthur de Jong <arthur@arthurdejong.org>

	* [9a7921f] nslcd/common.c, nslcd/common.h: Also fix signed integer
	  bug in binsid2id()

	  This should have been part of d217632.

2015-06-11  Geoffrey McRae <gnif@xbmc.org>

	* [d217632] nslcd/common.c: Fixed signed 32bit overflow bug on
	  32bit systems

2015-05-23  Jed Liu <jed-nss-pam-ldapd-users@uma.litech.org>

	* [3add5f0] nslcd/cfg.c: Allow configuration values longer than
	  63 characters

2015-03-06  Arthur de Jong <arthur@arthurdejong.org>

	* [d58fba9] nss/netgroup.c: Provide innetgr function on Solaris

	  This implements a function in the Solaris version of the NSS module
	  to check if a specifc netgroup triplet is part of a netgroup.

	  This also avoids a compiler warning and includes improvements
	  and testing by Mark R Bannister.

2015-05-01  Andrew Elble <aweits@rit.edu>

	* [c0366d8] man/nslcd.conf.5.xml, nslcd/cfg.c, nslcd/cfg.h,
	  nslcd/nslcd.c, pynslcd/cfg.py, pynslcd/group.py, pynslcd/passwd.py,
	  pynslcd/shadow.py: Implement disable_enumeration

	  If this option is present, functions which cause all user/group
	  entries to be loaded (getpwent(), getgrent()) from the directory
	  will not succeed in doing so. This can dramatically reduce
	  ldap server load in situations where there are a great number
	  of users and/or groups.  Applications that depend on being able
	  to sequentially read all users and/or groups may fail to operate
	  correctly. This option is not recommended for most configurations.

2015-04-17  Arthur de Jong <arthur@arthurdejong.org>

	* [96045d2] man/nslcd.conf.5.xml, nslcd/cfg.c, nslcd/cfg.h,
	  nslcd/group.c, pynslcd/cfg.py, pynslcd/group.py: Implement
	  nss_getgrent_skipmembers

	  This option allows skipping group member list retrieval to
	  improve performance with very large groups. This option results
	  in inconsistent group membership information being presented
	  that may confuse some applications.

2015-04-15  Arthur de Jong <arthur@arthurdejong.org>

	* [530cc24] nslcd/daemonize.c, nslcd/nslcd.c: Avoid signal race
	  condition on start-up

	  This only restores the signal mask after signal handlers are in
	  place and the daemon has completely daemonised to avoid a race
	  condition in the start-up phase of nslcd where a signal could
	  be sent to nslcd causing it to quit or fail to write information
	  to the parent process.

2015-03-29  Arthur de Jong <arthur@arthurdejong.org>

	* [16fd8c6] AUTHORS, ChangeLog, NEWS, README, configure.ac,
	  man/chsh.ldap.1.xml, man/getent.ldap.1.xml, man/nslcd.8.xml,
	  man/pam_ldap.8.xml, man/pynslcd.8.xml: Get files ready for
	  0.9.5 release

2015-03-11  Tim Rice <tim@multitalents.net>

	* [ae08830] common/Makefile.am, compat/Makefile.am, configure.ac,
	  nss/Makefile.am, pam/Makefile.am: Use correct PIC arg for
	  non-GCC compilers

2015-03-22  Arthur de Jong <arthur@arthurdejong.org>

	* [fdbca17] config.sub: Update files from latest automake

2015-03-22  Arthur de Jong <arthur@arthurdejong.org>

	* [9f9a5c5] nss/networks.c: Fix for networks lookup under Solaris

	  This fixes a byte order issue when nscd is running.

2015-03-22  Arthur de Jong <arthur@arthurdejong.org>

	* [52ea3f5] configure.ac: Add checks to configure

	  This adds tests for a function and type used in the code.

2015-03-22  Arthur de Jong <arthur@arthurdejong.org>

	* [4ec1c08] nslcd/daemonize.c: ENODATA is missing on FreeBSD

	  FreeBSD doesn't have ENODATA so we use ENOATTR instead.

2015-03-22  Arthur de Jong <arthur@arthurdejong.org>

	* [b2563b0] compat/nss_compat.h, configure.ac: Remove use of
	  irs-nss.h

	  This was a compatibility leftover from the nss_ldap days.

2015-03-21  Arthur de Jong <arthur@arthurdejong.org>

	* [4c5a3c9] tests/test_clock.c: Prevent numer overflow in test_clock

2015-03-21  Arthur de Jong <arthur@arthurdejong.org>

	* [0420232] nslcd/nslcd.c, nslcd/nsswitch.c, nss/Makefile.am,
	  tests/testenv.sh: Various small fixes when using --with-module-name

	  This updates the test framework to support --with-module-name,
	  ensures that exports.map is rebuilt when configure is re-ran,
	  fixes parsing of nsswitch.conf (to determine what to return for
	  passwd lookups) and fixes the check for _nss_ldap_version.

2015-03-21  Arthur de Jong <arthur@arthurdejong.org>

	* [788475f] nss/common.h: Also support platforms without TLS

	  This disables the use of thread-local storage in the NSS module
	  when it is not available in libc. This results in the get*ent()
	  functions not being thread-safe. However, on most platforms they
	  are not expected to be thread-safe anyway.

2015-03-20  Dalibor Pospíšil <dapospis@redhat.com>

	* [95d621e] man/nslcd.conf.5.xml: Document that multiple URIs can
	  be specified

	  Update nslcd.conf man page that multiple URIs can be set by
	  using more uri lines or more URIs defined on one uri line.

	  https://bugzilla.redhat.com/show_bug.cgi?id=1204195

2015-03-11  Patrick McLean <chutzpah@gentoo.org>

	* [fa6affc] common/tio.c, nslcd/attmap.c, nslcd/cfg.c,
	  nslcd/myldap.c: Fix formatting of size_t values

	  In several places the code used a %d format to print a size_t
	  variable.  On amd64 at least size_t is an unsigned long, so use
	  %lu instead.

	  An alternative would be to use %ud for size_t and %zd fo ssize_t
	  but not all platforms seem to support that formatter.

2015-03-11  Patrick McLean <chutzpah@gentoo.org>

	* [246aba5] nslcd/myldap.c, pam/pam.c: Avoid comparison of static
	  array to null pointer

	  There are several places where a static length array in a struct
	  is compared to a null pointer. These comparisons will always
	  be false, since an array in a struct is not actually a pointer,
	  so they can be removed.

2015-03-10  Patrick McLean <chutzpah@gentoo.org>

	* [d0f896a] AUTHORS, nslcd/nslcd.c: Don't let the oom killer
	  kill nslcd

	  Adjust the Linux OOM (Out-Of-Memory) killer score by -1000 for
	  nslcd so that it should not be killed.

2015-01-19  Arthur de Jong <arthur@arthurdejong.org>

	* [ee82d2f] .gitignore, configure.ac, nslcd/nslcd.c,
	  nss/Makefile.am, nss/aliases.c, nss/bsdnss.c, nss/common.c,
	  nss/common.h, nss/ethers.c, nss/group.c, nss/hosts.c,
	  nss/netgroup.c, nss/networks.c, nss/passwd.c, nss/protocols.c,
	  nss/prototypes.h, nss/rpc.c, nss/services.c, nss/shadow.c,
	  pam/pam.c, pynslcd/constants.py.in, pynslcd/pynslcd.py: Allow
	  configuration of NSS and PAM names

	  This introduces the --with-module-name configure option to
	  allow building of NSS and PAM modules with different namespaces
	  than ldap.

2015-01-12  Mark R Bannister <dbis@proseconsulting.co.uk>

	* [ed8b312] nss/hosts.c: Fix uninitialised variable

	  This fixes a bug in the NSS library when encountering IPv6
	  addresses in the hosts map.

2014-12-12  Arthur de Jong <arthur@arthurdejong.org>

	* [8b33057] nslcd/myldap.c: Avoid accessing searches outside array

	  Thanks David Binderma for pointing this out.

	  Note that in practical situations this should not result in any
	  errors due to the position of searches within the ldap_session
	  struct.

2014-11-02  Arthur de Jong <arthur@arthurdejong.org>

	* [9ee854e] man/nslcd.conf.5.xml: Document that rootpwmoddn needs
	  to exist

	  See
	  http://lists.arthurdejong.org/nss-pam-ldapd-users/2014/msg00166.html

2014-10-10  Arthur de Jong <arthur@arthurdejong.org>

	* [4262122] nslcd/nslcd.c: Fix format string

	  Thanks Jianhai Luan.

2014-10-04  Arthur de Jong <arthur@arthurdejong.org>

	* [1d3b19b] nslcd/nslcd.c: Block signals sooner to avoid race
	  conditions

2014-08-27  Jason Luan <jianhai.luan@oracle.com>

	* [78627c9] nslcd/cfg.c, nslcd/group.c, nslcd/nslcd.c,
	  nslcd/passwd.c: uid_t/gid_t should be formatted as unsigned long

	  mmkfilter_passwd_byuid()/mkfilter_group_bygid() get wrong filter
	  string because "%d" will return negative when uid/gid larger
	  than 2^31, and result to "Authentiction failure".

	  This also changes the other places where uid_t or gid_t values
	  are formatted.

2014-09-21  Arthur de Jong <arthur@arthurdejong.org>

	* [a726d29] nslcd/daemonize.c: Fix issues with daemonising

	  This fixes a problem with a buffer that could end up padded
	  with garbage.

	  This also clarifies the code a bit and adds extra logging for
	  errors that could occur during daemonising.

2014-06-30  Tim Harder <radhermit@gmail.com>

	* [82e4423] nslcd/myldap.c: Minor comment spelling fix

2014-06-30  Tim Harder <radhermit@gmail.com>

	* [2950797] AUTHORS, nslcd/myldap.c: Check a socket's connectivity
	  before trying to use it

	  This alleviates some cases where multi-second lag occurs before a
	  query returns due to some or all connections having been closed
	  by the peer, e.g. a load balancer timing out old connections,
	  but they are all tried before opening new connections.

	  Tested and working on Linux.

2014-06-20  Arthur de Jong <arthur@arthurdejong.org>

	* [1765e34] nslcd/common.h: Fix copy-pasto

2014-06-12  Arthur de Jong <arthur@arthurdejong.org>

	* [9516479] tests/test.ldif, tests/test_nsscmds.sh: Use other IP
	  range for tests

	  This uses IP addresses from the RFC 5737 TEST-NET-1 range that is
	  meant for use in documentation. This avoids issues with running
	  the tests environments that also use the 10.0.0.0/8 range.

2014-06-06  Arthur de Jong <arthur@arthurdejong.org>

	* [b3cf0aa] AUTHORS, ChangeLog, NEWS, configure.ac,
	  man/chsh.ldap.1.xml, man/getent.ldap.1.xml, man/nslcd.8.xml,
	  man/nslcd.conf.5.xml, man/pam_ldap.8.xml, man/pynslcd.8.xml:
	  Get files ready for 0.9.4 release

2014-06-06  Arthur de Jong <arthur@arthurdejong.org>

	* [abb2452] nss/services.c: Return correct port number on Solaris

	  This is a small fix for when using nscd (which still does not
	  seem to work completely). The port is stored in network byte
	  order but should be printed in host byte order.

2014-06-06  Arthur de Jong <arthur@arthurdejong.org>

	* [b977d3f] tests/lookup_groupbyuser.c: Add missing include
	  for FreeBSD

2014-06-06  Arthur de Jong <arthur@arthurdejong.org>

	* [258d671] nslcd/pam.c: Fix password modification by root

	  This fixes 15fc13c.

2014-06-06  Arthur de Jong <arthur@arthurdejong.org>

	* [8eeb1cc] common/tio.c: Clear proper buffer length

	  This fixes 3d29861.

2014-06-06  Arthur de Jong <arthur@arthurdejong.org>

	* [3d65b84] nslcd/common.h: Fix code indentation

	  This fixes 2274b41.

2014-06-06  Arthur de Jong <arthur@arthurdejong.org>

	* [e867727] config.guess, config.sub: Update files from latest
	  automake

2014-06-05  Arthur de Jong <arthur@arthurdejong.org>

	* [f5ee208] pynslcd/cache.py: Fix comment

2014-06-05  Arthur de Jong <arthur@arthurdejong.org>

	* [13483f9] .gitignore, configure.ac, tests/Makefile.am,
	  tests/lookup_groupbyuser.c: Introduce lookup_groupbyuser test
	  command

	  This command can be used to perform a lookup using getgrouplist()
	  to present a list of returned numeric group ids. This can be
	  used to avoid the additional lookups that are done with the id
	  and groups commands.

2014-05-14  Arthur de Jong <arthur@arthurdejong.org>

	* [3d29861] common/tio.c, nslcd/myldap.c, nslcd/pam.c: Clear
	  buffers before free-ing

	  This clears most buffers that may hold credentials at one point
	  before free()ing the memory.

2014-05-08  Arthur de Jong <arthur@arthurdejong.org>

	* [aa1d810] HACKING: Clarify code contribution

2014-05-04  Arthur de Jong <arthur@arthurdejong.org>

	* [94eacb5] nslcd/pam.c: Improve error logging of user login failures

2014-05-04  Arthur de Jong <arthur@arthurdejong.org>

	* [ca36a50] nslcd/myldap.c: Also extract policy controls on
	  BIND failure

	  This ensures that controls returned by an LDAP server as part of
	  a failed BIND operation are also returned. This makes it possible
	  to distinguish between a wrong password and an expired password.

	  This also only logs the BIND operation result on DEBUG level
	  (the error is logged later on).

2014-05-04  Arthur de Jong <arthur@arthurdejong.org>

	* [d6163e2] configure.ac: Use FreeBSD lib directory and SONAME
	  on Dragonfly

2014-05-04  Arthur de Jong <arthur@arthurdejong.org>

	* [f6f3730] README, man/nslcd.conf.5.xml: Small documentation
	  improvements

	  This includes a number of minor changes to the documentation. This
	  also documents the children search scope (related to 2caeef4).

2014-05-04  Arthur de Jong <arthur@arthurdejong.org>

	* [ed79110] nslcd/daemonize.c, nslcd/nslcd.c: Log daemonising
	  failures

	  This also clears errno in the main function to ensure that no
	  incorrect errno value is logged on errors.

2014-05-04  Arthur de Jong <arthur@arthurdejong.org>

	* [18d05b0] .gitignore, tests/Makefile.am, tests/test_attmap.c:
	  Add a test for setting member attribute mapping

2014-05-04  Arthur de Jong <arthur@arthurdejong.org>

	* [fbea2a5] nslcd/attmap.c: Fix mapping group member attribute to
	  empty string

	  This fixes be94912.

2014-05-04  Arthur de Jong <arthur@arthurdejong.org>

	* [2274b41] nslcd/alias.c, nslcd/attmap.c, nslcd/cfg.c,
	  nslcd/common.h, nslcd/ether.c, nslcd/group.c, nslcd/host.c,
	  nslcd/invalidator.c, nslcd/myldap.c, nslcd/netgroup.c,
	  nslcd/network.c, nslcd/pam.c, nslcd/passwd.c, nslcd/protocol.c,
	  nslcd/rpc.c, nslcd/service.c, nslcd/shadow.c: Make buffer size
	  error logging consistent

	  This adds logging of most cases where a defined buffer is not
	  large enough to hold provided data on error log level.

2014-05-04  Arthur de Jong <arthur@arthurdejong.org>

	* [15fc13c] nslcd/myldap.c, nslcd/myldap.h, nslcd/pam.c,
	  nslcd/usermod.c: Warn when binddn buffer is too small

2014-05-04  Arthur de Jong <arthur@arthurdejong.org>

	* [f987891] nslcd/common.h: Grow DN buffer size

	  The buffer size seems to be a problem in environments with long
	  names or environments with non-ASCII characters.

2014-05-02  ushi <ushi@honkgong.info>

	* [119cebf] nslcd/common.h: Use larger nslcd password buffer

	  I had some edge cases where 64 bytes were not enough. People
	  are using password managers with long generated passwords. I
	  increased the buffer size to 128.

2014-03-12  Arthur de Jong <arthur@arthurdejong.org>

	* [8f12c15] AUTHORS, ChangeLog, NEWS, configure.ac,
	  man/chsh.ldap.1.xml, man/getent.ldap.1.xml, man/nslcd.8.xml,
	  man/nslcd.conf.5.xml, man/pam_ldap.8.xml, man/pynslcd.8.xml,
	  pynslcd/pynslcd.py: Get files ready for 0.9.3 release

2014-03-12  Arthur de Jong <arthur@arthurdejong.org>

	* [1ec7739] INSTALL, missing, test-driver: Update files from
	  recent automake

2014-03-10  Arthur de Jong <arthur@arthurdejong.org>

	* [44764f0] tests/Makefile.am, tests/test_myldap.sh,
	  tests/test_nsscmds.sh: Run the correct executables for the tests

	  This fixes issues with running the tests when using a separate
	  build directory (fixes ef0eddaa).

2014-03-10  Arthur de Jong <arthur@arthurdejong.org>

	* [77444ac] tests/test_myldap.sh: Fix nslcd-test.conf permissions
	  for test

	  This ensures that configuration file is not world readable when
	  the tests are run. This avoids test failure for the use of the
	  rootpwmodpw option.

2014-03-10  Arthur de Jong <arthur@arthurdejong.org>

	* [96e4171] common/nslcd-prot.h: Interpret transferred integers
	  as signed again

	  This fixes an issue with unsigned values ending up in signed
	  fields and missing sign extension.

	  See: https://bugs.debian.org/739330

2014-01-27  Nalin Dahyabhai <nalin@redhat.com>

	* [2d35feb] nss/hosts.c, nss/networks.c: Use right h_errnop for
	  retrying with larger buffer

	  The libc nsswitch code expects h_errno to be set to NETDB_INTERNAL
	  when it needs to try again with a larger buffer.

	  Signed-off-by: Lukas Slebodnik <lslebodn@redhat.com>

2014-01-27  Lukas Slebodnik <lslebodn@redhat.com>

	* [8532f40] nss/hosts.c, nss/networks.c: Fix crash when retrieving
	  large networks entries

	  If NSS_STATUS_TRYAGAIN is returned from read_one_hostent or
	  read_one_netent then fp will be closed and function tio_skipall
	  will be called with NULL pointer.  It could happend in functions:
	      _nss_ldap_getnetbyname_r _nss_ldap_getnetbyaddr_r
	      _nss_ldap_gethostbyname2_r _nss_ldap_gethostbyaddr_r

	  Fixes r548 (aka afd5d9b).

2014-01-30  Davy Defaud <davy.defaud@free.fr>

	* [4211961] nslcd/group.c: Support builtin Windows groups

	  This maps the gid (gidNumber) to an AD SID for builtin
	  groups when searching a group by gid (RID) between 544 and
	  552. In that case the SID prefix is not the domain's prefix
	  (S-1-5-21-dddddd-dddddd-dddddd) but the BUILTIN SID prefix
	  (1-5-32).

	  For example, if you add a user to the Administrators builtin
	  group (S-1-5-32-544), now you should be able to get this group
	  through nslcd, instead of receiving an error message.

2014-01-25  Arthur de Jong <arthur@arthurdejong.org>

	* [f6a0675] configure.ac: Add test for krb5 thread safety

	  This adds a test that checks the return value of
	  krb5_is_thread_safe() to see if krb5 is thread safe (during build)
	  and issues a warning if it is not.

	  nslcd does not directly link to krb5 but the library may be
	  loaded (by GSSAPI) if Kerberos is used to authenticate nslcd to
	  the LDAP server.

2014-01-25  Francois Tigeot <ftigeot@wolfpond.org>

	* [043838c] configure.ac: Also detect DragonFly as BSD

	  This fixes the detection of DragonFly as requiring the freebsd
	  NSS interface flavour.

2014-01-24  joshuashire <joshuashire@hotmail.com>

	* [2181cca] nslcd/shadow.c: Update shadow.c to resolve pwdLastSet
	  issue

	  We read the date into the buffer to the specified length to get it
	  to the Unix time (i.e. seconds) from its AD value of nanoseconds,
	  then convert it to days for shadow. If we use date rather than
	  buffer we end up trying to convert the original nanosecond value.

2014-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [c6c317e] : Implement deref control handling

	  This uses the LDAP_CONTROL_X_DEREF control as described in
	  draft-masarati-ldap-deref-00 to request the LDAP server to
	  dereference group member attribute values to uid attribute values.

	  This should reduce the number of searches that are required for
	  expanding group members that use the member attribute.

	  This mechanism could also be used to extract information on
	  nested groups but the gains are less clear there.

	  Not all LDAP servers support this control. In OpenLDAP, load the
	  (currently undocumented) deref overlay and enable it for the
	  database to take advantage of this improvement.

	  There is a functional difference when using this control. Any
	  returned deferred uid value returned by the LDAP server is accepted
	  as a member.	No checks are performed to see if the user matches
	  the search base and search filters set for passwd entries.

2014-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [309b4bb] README: Update documentation

	  This documents the way the deref controls are used.

2014-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [cecc024] nslcd/group.c: Use myldap_get_deref_values() to get
	  member uids

	  This uses information from the deref control (if available)
	  to get the username for each of the members of the group. Any
	  missing deref member attribute values will be seen as nested
	  groups and will be traversed if nested group support is enabled.

2014-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [c973834] configure.ac, nslcd/myldap.c, nslcd/myldap.h: Provide
	  a myldap_get_deref_values() function

	  This function looks for deref response controls
	  (LDAP_CONTROL_X_DEREF) in the entry and returns the information
	  from the dereferenced attribute in two lists: dereferenced values
	  and attribute values that could not be dereferenced.

2014-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [3992e15] nslcd/group.c: Skip member attributes in bymember search

	  This changes the group by member searches to not request the
	  member attributes. This will speed up result parsing by a fraction
	  because less data is transferred but will also cause the deref
	  control not to be added to these searches.

2013-12-28  Arthur de Jong <arthur@arthurdejong.org>

	* [15ee2fc] compat/Makefile.am, compat/derefctrl.c,
	  compat/ldap_compat.h, configure.ac: Provide replacement
	  ldap_create_deref_control()

	  This adds a test for a bug in OpenLDAP that allocated a
	  LDAP_CONTROL_PAGEDRESULTS control instead of a LDAP_CONTROL_X_DEREF
	  control.

2014-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [547e479] configure.ac, nslcd/myldap.c: Request attribute deref
	  via search control

	  This uses the LDAP_CONTROL_X_DEREF control as descibed in
	  draft-masarati-ldap-deref-00 to request the LDAP server to
	  dereference member attribute values to uid attribute values in
	  order to avoid doing extra searches.

	  This control is currently only added for group search by looking
	  for the member attribute in the search.

2014-01-04  Arthur de Jong <arthur@arthurdejong.org>

	* [c22eb08] nslcd/myldap.c: Rename entry property to indicate
	  storage type

	  This changes entrye->rangedattributevalues to entry->buffers
	  because the propery is not only used for ranged attribute values
	  but for anything that can be freed with free().

2014-01-03  Arthur de Jong <arthur@arthurdejong.org>

	* [f009c96] nslcd/myldap.c: Ignore missing page controls

	  Since we could get arbitrray controls and are only interested
	  in page controls we ignore failures to find page controls.

2014-01-03  Arthur de Jong <arthur@arthurdejong.org>

	* [4f6dfdd] nslcd/myldap.c: Use do_try_search() also for paged
	  searches

	  This also changes do_try_search() to support building continued
	  paged controls and lays the groundwork for adding more search
	  controls.

2014-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [be94912] nslcd/attmap.c, nslcd/group.c, pynslcd/group.py:
	  Support blanking the member attribute

	  This allows remapping the member attribute to an empty string
	  which removes support for that attribute. This can reduce the
	  number of search operations if the attribute is not used.

2014-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [0d3fa5d] nslcd/group.c: Fix typo

2014-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [8e74848] nslcd/group.c, nss/netgroup.c, tests/test_set.c:
	  Fix memory leaks related to set_pop()

	  Some pieces of code did not properly free() the value returned
	  by set_pop().

	  The leak in group code was related to the introduction of nested
	  group functionality in 41ba574 (merged in 3daa68d) so should
	  only be present in releases 0.9.0 forward.

	  The leak in the netgroup code only ended up in the Solaris
	  version of the NSS module and was introduced in 4ea9ad1 (merged in
	  5c8779d). This leak is present in all releases from 0.8.0 forward.

2014-01-04  Arthur de Jong <arthur@arthurdejong.org>

	* [3288942] tests/test_myldap.c: Fix compiler warnings in the
	  myldap test

2014-01-02  Arthur de Jong <arthur@arthurdejong.org>

	* [2b8fbc2] : Only exit nslcd when daemon is ready

	  This removes a race condition between the exit of the initial
	  nslcd process (as started by the init script) and nslcd services
	  being ready.

2014-01-02  Arthur de Jong <arthur@arthurdejong.org>

	* [3afedc4] compat/Makefile.am, compat/daemon.c, compat/daemon.h,
	  configure.ac: Remove daemon() replacement function

2014-01-02  Arthur de Jong <arthur@arthurdejong.org>

	* [907d49d] configure.ac, nslcd/daemonize.c: Close daemon pipe
	  file descriptor on fork or exec

	  This tries to avoid child processes ending up with a copy of
	  the pipe file descriptor that is used to signal readiness of
	  the daemon.

2014-01-02  Arthur de Jong <arthur@arthurdejong.org>

	* [42a1a3d] nslcd/Makefile.am, nslcd/daemonize.c, nslcd/daemonize.h,
	  nslcd/nslcd.c: Properly daemonise nslcd and only exit when ready

	  This introduces a new daemonize module that provides functions for
	  closing all file descriptors, redirecting stdin/stdout/stderr to
	  /dev/null and a function for backgrounding an application while
	  only exiting the original process after the daemon process has
	  indicated readiness.

	  This is used to exit the original process only after the listening
	  socket has been set up and the worker threads have been started.

2013-12-28  Arthur de Jong <arthur@arthurdejong.org>

	* [e3f0453] configure.ac: Re-organise ldap function tests

2013-12-21  Arthur de Jong <arthur@arthurdejong.org>

	* [3ce5ef9] : Make dn2uid cache tuneable

	  This introduces a new cache configuration option that allows
	  setting positive and negative cache lifetimes for the dn2uid cache.

2013-12-21  Arthur de Jong <arthur@arthurdejong.org>

	* [19f3cc3] tests/test_cfg.c: Add a test for new configuration option

2013-12-21  Arthur de Jong <arthur@arthurdejong.org>

	* [09969cf] man/nslcd.conf.5.xml: Document cache option in
	  manual page

2013-12-21  Arthur de Jong <arthur@arthurdejong.org>

	* [a0c90d2] nslcd/passwd.c: Use dn2uid cache options

	  The configuration values are used in the cache to determine
	  positive and negative hit TTLs. This also allows completely
	  disabling the cache.

2013-12-21  Arthur de Jong <arthur@arthurdejong.org>

	* [99ad1b4] nslcd/cfg.c, nslcd/cfg.h: Implement a cache configuration
	  option

	  This adds the cache nslcd.conf configuration option to configure
	  the dn2uid cache in nslcd with a positive and negative cache
	  lifetime.

2013-12-19  Arthur de Jong <arthur@arthurdejong.org>

	* [82bac61] nslcd/passwd.c: Have positive and negative cache timeouts

	  The positive value determines the time a found entry is valid,
	  the negative timeout determines the lifetime of not found entries.

2013-12-19  Arthur de Jong <arthur@arthurdejong.org>

	* [b9ec6df] nslcd/cfg.c: Support printing children search scope

	  This fixes 2caeef4.

2013-12-18  Arthur de Jong <arthur@arthurdejong.org>

	* [9f02853] nslcd/alias.c, nslcd/common.c, nslcd/common.h,
	  nslcd/ether.c, nslcd/group.c, nslcd/host.c, nslcd/myldap.c,
	  nslcd/netgroup.c, nslcd/network.c, nslcd/pam.c, nslcd/passwd.c,
	  nslcd/protocol.c, nslcd/rpc.c, nslcd/service.c, nslcd/shadow.c,
	  nslcd/usermod.c: Centralise buffer sizes

	  Common buffer sizes are now stored centrally so it can be easily
	  and consistently updated if required. Some buffers remain with
	  locally defined sizes that do not match a global buffer size.

2013-11-25  Arthur de Jong <arthur@arthurdejong.org>

	* [23a41ce] compat/pam_get_authtok.c, compat/pam_prompt.c,
	  configure.ac, pam/pam.c: Add a test for pam_get_item() argument
	  type

	  This checks whether pam_get_item() takes a const void ** or void
	  ** item value argument and defines a PAM_ITEM_CONST macro that
	  is const when it should. This avoids some compiler warnings.

2013-10-30  Arthur de Jong <arthur@arthurdejong.org>

	* [81bfb8b] ChangeLog, NEWS, configure.ac, man/chsh.ldap.1.xml,
	  man/getent.ldap.1.xml, man/nslcd.8.xml, man/nslcd.conf.5.xml,
	  man/pam_ldap.8.xml, man/pynslcd.8.xml: Get files ready for
	  0.9.2 release

2013-10-29  Arthur de Jong <arthur@arthurdejong.org>

	* [ef0edda] tests/test_myldap.sh, tests/test_nsscmds.sh,
	  tests/test_pamcmds.expect: Portability fixes to environment tests

	  This mostly tries to reduce the influences of the test environment
	  (local users and groups) on the tests. This uses another username
	  (vsefcovic) in the PAM tests instead of the user arthur to avoid
	  clashes with existing users.

	  The PAM tests are skipped if passwd claims that it cannot modify
	  LDAP passwords (for FreeBSD).

2013-10-29  Arthur de Jong <arthur@arthurdejong.org>

	* [f8af48f] compat/ldap_parse_passwordpolicy_control.c,
	  nslcd/common.c, nslcd/config.c, nslcd/group.c, nslcd/nslcd.c,
	  nslcd/pam.c, nslcd/protocol.c, nslcd/rpc.c, nslcd/service.c,
	  nss/bsdnss.c, nss/ethers.c, nss/group.c, nss/netgroup.c,
	  nss/networks.c, nss/passwd.c, nss/protocols.c, nss/rpc.c,
	  nss/services.c, pam/pam.c: Fix a number of compiler warnings

	  This includes a number of small fixes for issues that were
	  formerly masked by the incorrect AC_LANG_PROGRAM check.

2013-10-29  Arthur de Jong <arthur@arthurdejong.org>

	* [88801f9] configure.ac: Add -Werror=implicit if compiler
	  supports it

2013-10-29  Arthur de Jong <arthur@arthurdejong.org>

	* [933bf8e] configure.ac: Fix usage of AC_LANG_PROGRAM

	  Apparently the macro got changed a long time ago to provide a
	  main() definition. This bug caused the extra warning flags to
	  not be added.

2013-10-29  Arthur de Jong <arthur@arthurdejong.org>

	* [6028226] compat/Makefile.am, compat/shell.h, configure.ac,
	  nslcd/usermod.c: Compatibility definitions for
	  {set,get,end}usershell()

	  This provides compatibility definitions for systems that don't
	  have these functions (some Solaris flavours).

2013-10-28  Arthur de Jong <arthur@arthurdejong.org>

	* [ed4cf47] nslcd/nslcd.c: Start invalidator after locking pidfile

	  This causes the pidfile to be written as the first thing after
	  daemonising nslcd to minimise the race between service script
	  completion and pidfile being locked.

2013-10-27  Arthur de Jong <arthur@arthurdejong.org>

	* [503644b] HACKING, README: Update documentation

2013-10-27  Arthur de Jong <arthur@arthurdejong.org>

	* [6be316e] autogen.sh, configure.ac: Specify m4 directory in
	  configure script

2013-10-25  Arthur de Jong <arthur@arthurdejong.org>

	* [1d8db24] nslcd/myldap.c, pynslcd/search.py: Also run invalidators
	  on initial connect

	  This also invalidates the caches configured with
	  reconnect_invalidate on the first successful search. This should
	  handle the case more gracefully where caches were filled with
	  negative hits before nslcd was running.

2013-10-25  Arthur de Jong <arthur@arthurdejong.org>

	* [ee8737f] tests/Makefile.am: Distribute setup_slapd.sh and
	  associated files

2013-10-22  Arthur de Jong <arthur@arthurdejong.org>

	* [e28e937] tests/test_myldap.sh, tests/testenv.sh: Improve
	  portability of ldap test

	  This supports old ldapsearch commands that don't support the -x
	  and -H options and ldapsearch commands that don't exit with a
	  failure code if nothing is found.

	  This also switches the test_myldap test to use the testenv check
	  for the LDAP server.

2013-10-20  Arthur de Jong <arthur@arthurdejong.org>

	* [8cc354a] tests/test_pamcmds.expect: Handle other responses
	  in test_pamcmds

	  This extends test_pamcmds to handle other pam/su/passwd errors
	  and responses (as seen on CentOS 5). Also switch to stronger
	  password when changing the test user's password to avoid problems
	  with password strength checks.

2013-10-20  Arthur de Jong <arthur@arthurdejong.org>

	* [0a95557] tests/Makefile.am, tests/in_testenv.sh,
	  tests/test_nsscmds.sh, tests/test_pamcmds.expect,
	  tests/test_pamcmds.sh, tests/testenv.sh: Make script to check
	  test environment

	  This changes the in_testenv.sh script into testenv.sh which has
	  more checks and a few functions to configure the test environment.

2013-10-20  Arthur de Jong <arthur@arthurdejong.org>

	* [1899e9a] tests/test.ldif: Remove unnecessary attributes from
	  test.ldif

2013-10-20  Arthur de Jong <arthur@arthurdejong.org>

	* [cebc2a1] tests/README: Update tests README

	  This refreshes the documentation of the tests, especially the
	  test environment.

2013-10-20  Arthur de Jong <arthur@arthurdejong.org>

	* [7cbb439] tests/config.ldif, tests/setup_slapd.sh: Provide a
	  script for setting up slapd

	  The setup_slapd.sh script can be used to set up and start a
	  slapd instance in a single (temporary) directory. The slapd
	  instance is configured and loaded with test data for use in the
	  test environment.

2013-10-19  Arthur de Jong <arthur@arthurdejong.org>

	* [aeccbfe] tests/test_nsscmds.sh: Fix sortgroup function

	  This fixes an issue with the sortgroup function which failed to
	  handle a group line with only two colons correctly. Such group
	  entries have been seen in the wild on FreeBSD.

	  Also, comment lines in group files are now ignored (also seen
	  on FreeBSD).

2013-10-14  Arthur de Jong <arthur@arthurdejong.org>

	* [0697347] common/dict.c: Use djb2 hash in dict module

	  This slightly modifies the string hashing function to use the
	  djb2 hash.  This hash is supposed to be reasonably fast and have
	  reasonably few collisions.

2013-10-07  Arthur de Jong <arthur@arthurdejong.org>

	* [61e96bf] nslcd/cfg.h: Increase NSS_LDAP_CONFIG_MAX_BASES to 31

	  This allows more search bases which may be useful in some
	  environments.

2013-09-15  Arthur de Jong <arthur@arthurdejong.org>

	* [2f088ec] common/tio.c: Also support poll() returning EAGAIN

2013-09-13  Arthur de Jong <arthur@arthurdejong.org>

	* [173d768] configure.ac: Add more python module checks to configure

2013-09-13  Arthur de Jong <arthur@arthurdejong.org>

	* [b7ca95a] configure.ac: Make missing Python modules a waring

	  This avoids having to have all modules installed in the build
	  environment. A Python version is still required during build.

2013-09-13  Arthur de Jong <arthur@arthurdejong.org>

	* [f36bb81] pynslcd/cache.py, pynslcd/group.py: Remove unneeded
	  imports

2013-09-13  Arthur de Jong <arthur@arthurdejong.org>

	* [8ae8b9a] Makefile.am, configure.ac, tests/Makefile.am: Cleanups
	  and fixes related to automake upgrade

	  This removes a few legacy workarounds and fixes for older versions
	  of automake. This also removes adding specific DEBUG flags for
	  tests since subdir objects are handled differently now.

2013-09-13  Arthur de Jong <arthur@arthurdejong.org>

	* [2bd2bc4] pam/pam.c: Initialise msg to avoid potential NULL
	  pointer dereference

	  The NULL pointer dereference in the PAM module should not occur due
	  to the relationship with the rc value that is handled alongside
	  it. This change mostly silences the compiler and protects from
	  future changes.

2013-09-13  Arthur de Jong <arthur@arthurdejong.org>

	* [dccc9cf] configure.ac: Add configure test for
	  {set,get,end}usershell() availability

2013-09-08  Arthur de Jong <arthur@arthurdejong.org>

	* [4fc4197] autogen.sh: Upgrade to automake 1.14

2013-09-08  Arthur de Jong <arthur@arthurdejong.org>

	* [bc6a18e] nslcd/nslcd.c: Use larger nslcd send buffers

	  By using bigger write buffers in nslcd we reduce the number of
	  writes in nslcd and consequently the number of reads in the NSS
	  and PAM modules for bigger responses.

	  This reduces the number of system calls that are made during
	  a request and brings a small performance improvement that is
	  mainly measurable in the NSS module. A measurement showed 30-80%
	  reduction in the number of system calls in the NSS module and
	  around 10% reduction in CPU usage (CPU time, only small reduction
	  in wallclock time).

	  Thanks John Sullivan for pointing this out.

2013-09-08  Arthur de Jong <arthur@arthurdejong.org>

	* [58d50bf] configure.ac, man/Makefile.am: Add configure check to
	  see whether to install manual pages

	  This also reworks the manual page generation check in the configure
	  script and avoids build errors if no tool for generating manual
	  pages is present when working on a Git checkout.

2013-09-04  Arthur de Jong <arthur@arthurdejong.org>

	* [ce95b41] ldapns.ldif: Reformat LDIF file to follow OpenLDAP format

	  This fixes a wrapping problem. Thanks to Paul Boven for pointing
	  this out.

2013-09-02  Arthur de Jong <arthur@arthurdejong.org>

	* [8b169f1] tests/test_common.c: Fix permissions of test
	  configuration

	  This sets the permissions on the nslcd-test.conf file while
	  running the tests to ensure that the permission checks for the
	  bindpwn and rootpwmodpw options do not fail the test.

2013-09-02  Arthur de Jong <arthur@arthurdejong.org>

	* [560e5de] .gitignore, tests/Makefile.am, tests/test_tio_timeout.c:
	  Add a test for tio timeout calculations

	  This test checks whether the proposed remaining time to sleep
	  is reasonable.

2013-09-02  Arthur de Jong <arthur@arthurdejong.org>

	* [db5382e] .gitignore, tests/Makefile.am, tests/test_clock.c:
	  Add a test for clock_gettime() supported clocks

	  This probes the system for available clocks to see if they can
	  be reliably used to get a monotonic-like timer (the test doesn't
	  verify the monotonic part, just usability).

2013-09-01  Arthur de Jong <arthur@arthurdejong.org>

	* [7895739] AUTHORS, common/tio.c, configure.ac: Use clock_gettime()
	  instead of gettimeofday()

	  This avoids problems with system clock changes (though there
	  are some safeguards in place to avoid waiting too long on clock
	  changes).

	  Thanks to John Sullivan for pointing this out.

	  We can't easily use CLOCK_MONOTONIC_RAW or CLOCK_MONOTONIC_COARSE
	  even on platforms that define the clock because we can get
	  runtime errors.  CLOCK_MONOTONIC seems to work on all tested
	  platforms that provide it.

2013-09-02  Arthur de Jong <arthur@west.nl>

	* [a683aa8] tests/test_manpages.sh: Small protability fix

2013-09-01  Arthur de Jong <arthur@arthurdejong.org>

	* [c8800eb] tests/test_manpages.sh: Improve robustness of
	  test_manpages

2013-08-31  Arthur de Jong <arthur@arthurdejong.org>

	* [644df52] common/tio.c, common/tio.h: Use normal timeout handling
	  in tio_skipall()

	  Use the same mechanism in tio_skipall() as in tio_read(), except
	  use a different timeout value.

2013-08-31  Arthur de Jong <arthur@arthurdejong.org>

	* [0787d45] common/tio.c: Refactor tio_wait()

	  This changes the function to accept a file descriptor, an event
	  and timeout parameter directly instead of a confusing flag.

2013-08-31  Arthur de Jong <arthur@arthurdejong.org>

	* [07a8170] common/tio.c: Fix buffer overflow on interupted read

	  The tio_read() function will read past its buffer and return
	  garbadge to the calling function if the call to read() was
	  interrupted by a signal.

	  The likelyhood of read() being interupted is low because previously
	  a call to poll() has determined that data is available to be read.

	  Thanks to John Sullivan for pointing this out.

	  See: https://bugzilla.redhat.com/show_bug.cgi?id=1003011

2013-08-30  Arthur de Jong <arthur@arthurdejong.org>

	* [4897033] nslcd/common.h: In nslcd, log EPIPE only on debug level

	  See: https://bugzilla.redhat.com/show_bug.cgi?id=1003011

2013-08-30  Arthur de Jong <arthur@arthurdejong.org>

	* [c9e2f97] common/tio.c, common/tio.h, nss/common.h: Use a timeout
	  when skipping remaining result data

	  When the NSS modules closes the connection and skips any remaining
	  result data, wait for up to 500 msec to read any available data.

	  See: https://bugzilla.redhat.com/show_bug.cgi?id=1003011

2013-08-27  Bersl <bersl2@bersl2.info>

	* [7140d21] AUTHORS, nslcd/group.c, nslcd/passwd.c, nslcd/shadow.c:
	  Increase password buffer size

	  With the smaller buffers some password hashes would be truncated.

2013-08-28  Arthur de Jong <arthur@arthurdejong.org>

	* [8571bc1] NEWS, README, common/dict.c, compat/attrs.h,
	  compat/nss_compat.h, man/nslcd.conf.5.xml, nslcd/myldap.c:
	  Fix for common spelling mistake

2013-08-25  Arthur de Jong <arthur@arthurdejong.org>

	* [890d227] AUTHORS, ChangeLog, NEWS, configure.ac,
	  man/chsh.ldap.1.xml, man/getent.ldap.1.xml, man/nslcd.8.xml,
	  man/nslcd.conf.5.xml, man/pam_ldap.8.xml, man/pynslcd.8.xml:
	  Get files ready for 0.9.1 release

2013-08-25  Arthur de Jong <arthur@arthurdejong.org>

	* [f9b4b43] Makefile.am: Have a nicer way of generating the ChangeLog

	  This adds the commit id, improves the line wrapping and also
	  gets rid of the external dependency.

2013-08-25  Arthur de Jong <arthur@arthurdejong.org>

	* [321d8a3] pynslcd/pynslcd.py: Handle failure of getpeercred
	  more gracefully

2013-08-25  Arthur de Jong <arthur@arthurdejong.org>

	* [f18729e] tests/Makefile.am: Only run pynslcd tests if it
	  is enabled

2013-08-25  Arthur de Jong <arthur@arthurdejong.org>

	* [f54f2ad] configure.ac, m4/ax_python_module.m4: Add configure
	  test for Python modules

	  This uses the AX_PYTHON_MODULE test to check for availability
	  of used Python modules. All third-party modules and modules that
	  are not a builtin for Python 2.5 are tested.

	  This also splits the tests for the utils and pynslcd.

2013-08-25  Arthur de Jong <arthur@arthurdejong.org>

	* [6f61482] pynslcd/attmap.py, pynslcd/group.py, pynslcd/pynslcd.py,
	  pynslcd/tio.py, utils/getent.py, utils/nslcd.py: Rearrange
	  Python imports

2013-08-23  Arthur de Jong <arthur@arthurdejong.org>

	* [f6c20ee] nslcd/nslcd.c: Ignore SIGUSR2 for future compatibility

2013-08-23  Arthur de Jong <arthur@arthurdejong.org>

	* [27abbbb] man/Makefile.am, tests/Makefile.am,
	  tests/test_manpages.sh: Add a test for the manual pages

	  This replaces e0491d2 to run xmlto from the man directory. This
	  handles the case more gracefully if xmlto is not available.

2013-08-18  Arthur de Jong <arthur@arthurdejong.org>

	* [494833d] config.guess, config.sub: Update files from latest
	  automake

2013-08-21  Arthur de Jong <arthur@arthurdejong.org>

	* [7b474d0] pynslcd/group.py, pynslcd/passwd.py, pynslcd/shadow.py:
	  Have pynslcd handle mapped userPassword

	  This fixes an error that could occur when the userPassword was
	  retrieved from LDAP and insufficient privileges were available
	  for reading the attribute.

2013-08-21  Arthur de Jong <arthur@arthurdejong.org>

	* [b0358f7] : Retry LDAP servers quickly after receiving SIGUSR1

	  When nslcd receives the SIGUSR1 signal it will retry connecting
	  to unavailable LDAP servers sooner.

	  This signal can for example be sent when (re)stablishing a
	  network connection.

2013-08-20  Arthur de Jong <arthur@arthurdejong.org>

	* [ebbe8a6] man/nslcd.8.xml, nslcd/nslcd.c: Handle SIGUSR1 by
	  resetting the retry timer

	  This implements and documents handling of the SIGUSR1 signal in
	  nslcd to reset the reconnect_sleeptime and reconnect_retrytime
	  timers to re-check availability of the LDAP server.

2013-08-20  Arthur de Jong <arthur@arthurdejong.org>

	* [8bdb289] nslcd/myldap.c, nslcd/myldap.h: Implement function
	  for resetting reconnect times

	  This implemens a myldap_immediate_reconnect() function that
	  resets the reconnect timer to retry failing connections to the
	  LDAP server upon the next search.

	  This can be used to cut the reconnect_sleeptime and
	  reconnect_retrytime sleeping periodss short if we have some
	  indication that the LDAP server is available again.

2013-08-20  Arthur de Jong <arthur@arthurdejong.org>

	* [d58f163] nslcd/common.h, nslcd/nslcd.c, nslcd/shadow.c: Return
	  partial shadow information to non-root users

	  This also returns everything except the password hash from
	  the shadow database to non-root users (nothing was returned
	  before). This allows non-root users to do PAM authentication in
	  some configurations.

	  On some systems there is a setgid executable that is allowed to
	  read /etc/shadow for authentication by e.g. screensavers. Returning
	  no shadow information will cause pam_unix to deny authorisation
	  in common configurations.

	  See: http://bugs.debian.org/706913

2013-08-20  Arthur de Jong <arthur@arthurdejong.org>

	* [34365b4] nslcd/cfg.c: Add cast to int when logging configuration
	  summary

2013-08-18  Arthur de Jong <arthur@arthurdejong.org>

	* [44a38eb] pam/pam.c: Small fix in NEW_AUTHTOK_REQD handling

	  There is a potential memory leak if the old password is saved
	  multiple times. Furthermore, PAM_NEW_AUTHTOK_REQD is only allowed
	  as a result of the authorisation phase, not the authentication
	  phase so there is no use in checking.

2013-08-18  Arthur de Jong <arthur@arthurdejong.org>

	* [d8637bb] pynslcd/pam.py: Fix rootpwmodpw handling in pynslcd

2013-08-18  Arthur de Jong <arthur@arthurdejong.org>

	* [13d31b7] pynslcd/common.py: Fix not logging passwords in pynslcd
	  (7108b1f)

2013-08-18  Arthur de Jong <arthur@arthurdejong.org>

	* [7e90541] tests/nslcd-test.conf, tests/test.ldif: Update files
	  from test environment

2013-07-29  Arthur de Jong <arthur@arthurdejong.org>

	* [724a75f] utils/getent.py: Improve error and help output of
	  getent command

2013-08-18  Arthur de Jong <arthur@arthurdejong.org>

	* [882f7be] tests/Makefile.am, tests/pylint.rc, tests/test_pylint.sh:
	  Run pylint as a test

	  This runs a somewhat limited pylint run against the source
	  files. It should at least catch some issues.

2013-08-18  Arthur de Jong <arthur@arthurdejong.org>

	* [79209ee] pynslcd/common.py, pynslcd/group.py, pynslcd/pam.py,
	  pynslcd/passwd.py: Rename isvalidname() to is_valid_name()
	  in pynslcd

2013-08-10  Arthur de Jong <arthur@arthurdejong.org>

	* [e0491d2] man/Makefile.am: Run xmlto on manual pages as part of
	  the tests

2013-08-18  Arthur de Jong <arthur@arthurdejong.org>

	* [7108b1f] pynslcd/common.py: Do not log passwords in pynslcd

2013-08-18  Arthur de Jong <arthur@arthurdejong.org>

	* [cda6dcd] : Implement an option to run in the foreground

	  This introduces a -n, --nofork option that skips the deamonising
	  step on start-up. This may be required for running nslcd from
	  upstart.

	  See: https://bugs.launchpad.net/bugs/806761

2013-08-18  Arthur de Jong <arthur@arthurdejong.org>

	* [1825be6] man/nslcd.8.xml, man/pynslcd.8.xml: Document -n,
	  --nofork option

2013-08-18  Arthur de Jong <arthur@arthurdejong.org>

	* [82bcfd7] pynslcd/pynslcd.py: -n switch for pynslcd

2013-08-17  Caleb Callaway <enlightened.despot@gmail.com>

	* [14b93b9] nslcd/nslcd.c: -n switch for nslcd (prevents process
	  from forking)

2013-08-17  Arthur de Jong <arthur@arthurdejong.org>

	* [8a3f0f5] : Improvements to pynslcd caching functionality

	  This fixes most of the existing caching functionality. Cache
	  expiry, negative hits and entries going away remain to be
	  implemented.

2013-08-16  Arthur de Jong <arthur@arthurdejong.org>

	* [a066bcb] configure.ac, tests/Makefile.am,
	  tests/test_pynslcd_cache.py: Implement tests for caching
	  functionality

2013-08-12  Arthur de Jong <arthur@arthurdejong.org>

	* [d66162a] pynslcd/alias.py, pynslcd/cache.py, pynslcd/group.py,
	  pynslcd/host.py, pynslcd/netgroup.py, pynslcd/network.py,
	  pynslcd/protocol.py, pynslcd/rpc.py, pynslcd/service.py: Use
	  retrieve_by, group_by and group_columns in the cache

	  This removes custom retrieve() functions and Query classes from
	  the database modules and uses retrieve_sql retrieve_by, group_by
	  and group_columns to make a custom retrieval query.

	  In the cache module this completely replaces how the query grouping
	  is done. The Query class is now only used inside the cache and the
	  CnAliasedQuery, RowGrouper and related classed have been removed.

2013-04-23  Arthur de Jong <arthur@arthurdejong.org>

	* [bfe22cc] pynslcd/cache.py: Make Cache a context manager

2013-08-12  Arthur de Jong <arthur@arthurdejong.org>

	* [1b89df5] pynslcd/alias.py, pynslcd/cache.py, pynslcd/group.py,
	  pynslcd/host.py, pynslcd/netgroup.py, pynslcd/network.py,
	  pynslcd/protocol.py, pynslcd/rpc.py, pynslcd/service.py: Give
	  cache tables friendlier names

	  This also defined the tables for netgroup storage.

2013-08-11  Arthur de Jong <arthur@arthurdejong.org>

	* [7671276] pynslcd/alias.py, pynslcd/cache.py, pynslcd/group.py,
	  pynslcd/host.py, pynslcd/network.py, pynslcd/protocol.py,
	  pynslcd/rpc.py, pynslcd/service.py: Explicitly define tables
	  used for cache

	  This introduces the tables property in the Cache object that is
	  used to define the used tables.

	  This also fixes the storing of mulit-valued attributes in
	  the cache.

2013-04-16  Arthur de Jong <arthur@arthurdejong.org>

	* [b0b5723] pynslcd/alias.py, pynslcd/cache.py, pynslcd/ether.py,
	  pynslcd/group.py, pynslcd/host.py, pynslcd/netgroup.py,
	  pynslcd/network.py, pynslcd/passwd.py, pynslcd/protocol.py,
	  pynslcd/rpc.py, pynslcd/service.py, pynslcd/shadow.py: Move
	  cache table creation to modules

	  This also moves the creation of a SQLite database connection to
	  a _get_connection() function to ensure the cache is only created
	  when the caches are instantiated.

2013-07-30  Arthur de Jong <arthur@arthurdejong.org>

	* [84d22e6] pynslcd/passwd.py: Fix missing part of d659e83

2013-07-29  Arthur de Jong <arthur@arthurdejong.org>

	* [ec53918] pynslcd/group.py, pynslcd/passwd.py: Use cleaner import
	  and get rid of uid2dn function in pynslcd

2013-07-29  Arthur de Jong <arthur@arthurdejong.org>

	* [d659e83] pynslcd/cfg.py, pynslcd/passwd.py: Handle the nss_min_uid
	  option in pynslcd

2013-07-29  Arthur de Jong <arthur@arthurdejong.org>

	* [7092d40] pynslcd/cfg.py, pynslcd/group.py: Handle the
	  nss_initgroups_ignoreusers option in pynslcd

2013-07-27  Arthur de Jong <arthur@arthurdejong.org>

	* [a0e12e6] pynslcd/cfg.py, pynslcd/pam.py: Fix handling of
	  pam_password_prohibit_message in pynslcd

2013-07-29  Arthur de Jong <arthur@arthurdejong.org>

	* [fa97bcc] pynslcd/Makefile.am, pynslcd/config.py,
	  pynslcd/pynslcd.py: Implement config request handling in pynslcd

	  This allows the PAM module to request the
	  pam_password_prohibit_message option for denying password change.

2013-07-27  Arthur de Jong <arthur@arthurdejong.org>

	* [a3acbec] pynslcd/pam.py: Implement PAM session handling in pynslcd

	  Just like in nslcd this doesn't actually do anything with the
	  session ids except generating them.

2013-07-26  Arthur de Jong <arthur@arthurdejong.org>

	* [4031750] pynslcd/search.py: Properly handle start_tls in pynslcd

2013-07-27  Arthur de Jong <arthur@arthurdejong.org>

	* [5d3f681] configure.ac: Have configure show --disable-utils
	  by default

	  Since the utils are automatically built if Python is available
	  --disable is more appropriate a default then --enable.

2013-07-27  Arthur de Jong <arthur@arthurdejong.org>

	* [5adc2ca] tests/test_pycompile.sh: Have test_pycompile not write
	  any pyc files

	  We need to avoid writing pyc files because during make distcheck,
	  the source directory is read-only.

	  This also ensures that the test is skipped if the Python
	  interpreter is not found.

2013-07-27  Arthur de Jong <arthur@arthurdejong.org>

	* [e17730f] README: Dcoumentation updates

	  This fixes a typo, clarifies the section on the LDAP schema
	  values that are supported and updates the differences between
	  nss-pam-ldapd and nss_ldap and pam_ldap.

2013-07-26  Arthur de Jong <arthur@arthurdejong.org>

	* [30ffdb2] tests/Makefile.am, tests/test_pycompile.sh: Test Python
	  syntax on make check

2013-07-26  Arthur de Jong <arthur@arthurdejong.org>

	* [10eec70] : Merge fixes for reconnect_invalidate option

	  The branch accidentally got merged before it was fully tested.

2013-07-26  Arthur de Jong <arthur@arthurdejong.org>

	* [dce98a5] nslcd/cfg.c, nslcd/invalidator.c, pynslcd/invalidator.py,
	  pynslcd/pynslcd.py: Fix errors in invalidator changes

	  This fixes a few typos and an omission in the configuration file
	  parsing code.

2013-07-26  Arthur de Jong <arthur@arthurdejong.org>

	* [7c85202] : Make cache invalidation more generic

	  This changes the nscd_invalidate option into a more generic
	  reconnect_invalidate and also allows clearing the nfsidmap cache.

2013-07-26  Arthur de Jong <arthur@arthurdejong.org>

	* [e1b0399] man/nslcd.conf.5.xml, nslcd/Makefile.am, nslcd/cfg.c,
	  nslcd/cfg.h, nslcd/common.h, nslcd/invalidator.c, nslcd/myldap.c,
	  nslcd/nscd.c, nslcd/nslcd.c, pynslcd/Makefile.am, pynslcd/cfg.py,
	  pynslcd/invalidator.py, pynslcd/nscd.py, pynslcd/pynslcd.py,
	  pynslcd/search.py, tests/Makefile.am: Rename nscd_invalidate
	  option to reconnect_invalidate

	  This also renames the internal nscd module to invalidator for
	  both nslcd and pynslcd. The new invalidator module is now no
	  longer nscd-specific.

2013-07-26  Arthur de Jong <arthur@arthurdejong.org>

	* [6054499] man/nslcd.conf.5.xml, nslcd/attmap.c, nslcd/cfg.c,
	  nslcd/cfg.h, nslcd/nscd.c, pynslcd/cfg.py, pynslcd/nscd.py:
	  Allow invalidating the nfsidmap cache

	  This introduces an nfsidmap value for nscd_invalidate which will
	  cause the nfsidmap -c command to be run.

2013-07-17  Arthur de Jong <arthur@arthurdejong.org>

	* [d2e2e40] pynslcd/nscd.py: Fix nscd cache flushing bug in pynslcd

	  The pynslcd implementation would always clear the passwd nscd
	  cache regardless of the provided map.

2013-07-11  Arthur de Jong <arthur@arthurdejong.org>

	* [5b78508] .gitignore, INSTALL, ar-lib, autogen.sh, compile,
	  config.guess, config.sub, configure.ac, depcomp, install-sh,
	  missing, mkinstalldirs, py-compile, test-driver: Upgrade to
	  automake 1.13

2013-05-20  Arthur de Jong <arthur@arthurdejong.org>

	* [ee7b2e9] tests/lookup_shadow.c: Add an explicit cast to int
	  in lookup_shadow

2013-04-14  Arthur de Jong <arthur@arthurdejong.org>

	* [b6f5047] nslcd/nscd.c: Make tests for system call failures a
	  little more robustly

2013-05-10  Arthur de Jong <arthur@arthurdejong.org>

	* [97d35f3] pynslcd/pynslcd.py: Ignore errors in opening NSS module

2013-04-12  Arthur de Jong <arthur@arthurdejong.org>

	* [b15dc66] pynslcd/cache.py, pynslcd/cfg.py, pynslcd/group.py,
	  pynslcd/nscd.py, pynslcd/pynslcd.py, pynslcd/search.py,
	  pynslcd/shadow.py, pynslcd/tio.py, pynslcd/usermod.py,
	  utils/chsh.py, utils/getent.py, utils/nslcd.py, utils/users.py:
	  Python style changes

	  This tries to conform more closely to PEP8. Imports have been
	  checked and, if used only once, moved closer to the use to avoid
	  potential import loops. This also includes a few other minor
	  changes, like using __main__ for utility scripts and variable
	  renames to avoid name clashes.

2013-04-12  Arthur de Jong <arthur@arthurdejong.org>

	* [d3c6a66] pynslcd/pam.py: Raise an error with a missing old
	  password on password modification

2013-04-12  Arthur de Jong <arthur@arthurdejong.org>

	* [f45b24d] utils/nslcd.py: Set FD_CLOEXEC on the client socket
	  in utilities

2013-04-12  Arthur de Jong <arthur@arthurdejong.org>

	* [bc35197] pynslcd/pam.py: Fix getting caller's uid on password
	  change (pynslcd)

2013-04-06  Arthur de Jong <arthur@arthurdejong.org>

	* [84402e5] utils/Makefile.am: Install utilities in share/nslcd-utils

2013-04-06  Arthur de Jong <arthur@arthurdejong.org>

	* [b5b4239] man/Makefile.am: Fix the way manual pages are installed

	  The :u flag apparently isn't portable across versions of make
	  and automake rules complain if a manual page is added twice to
	  a target.

2013-04-05  Arthur de Jong <arthur@arthurdejong.org>

	* [187c626] ChangeLog, NEWS, TODO, configure.ac,
	  man/getent.ldap.1.xml, man/nslcd.8.xml, man/nslcd.conf.5.xml,
	  man/pam_ldap.8.xml, man/pynslcd.8.xml: Get files ready for
	  0.9.0 release

2013-04-05  Arthur de Jong <arthur@arthurdejong.org>

	* [2616f43] pynslcd/Makefile.am: Include the usermod.py file in
	  the distribution

2013-04-05  Arthur de Jong <arthur@arthurdejong.org>

	* [c519729] man/chsh.ldap.1.xml: Fix docbook validation

2013-04-03  Arthur de Jong <arthur@arthurdejong.org>

	* [1c31305] configure.ac: Ignore missing Python in initial test

2013-04-03  Arthur de Jong <arthur@arthurdejong.org>

	* [4b01125] nslcd/nslcd.c: Fix comment

2013-03-30  Arthur de Jong <arthur@arthurdejong.org>

	* [d7990de] pynslcd/pam.py: Update the shadowLastChange on password
	  change in pynslcd

2013-03-30  Arthur de Jong <arthur@arthurdejong.org>

	* [ea6bff3] pynslcd/pam.py: Implement password modification
	  in pynslcd

2013-03-30  Arthur de Jong <arthur@arthurdejong.org>

	* [62a409c] : Implement used modification functionality

	  This adds user information modification functionality to nslcd
	  and pynslcd and implements a chsh.ldap utility that can be
	  used to change the login shell of a user (similar to the normal
	  chsh command).

	  The user modification functionality should allow for generic
	  modifications of user information. More utility commands to
	  perform modifications remain to be implemented.

2013-03-30  Arthur de Jong <arthur@arthurdejong.org>

	* [012b185] .gitignore, man/Makefile.am, man/chsh.ldap.1.xml,
	  utils/Makefile.am, utils/chsh.py, utils/cmdline.py, utils/nslcd.py,
	  utils/shells.py, utils/users.py: Initial version of a chsh.ldap
	  utility

2013-03-30  Arthur de Jong <arthur@arthurdejong.org>

	* [d0482fb] pynslcd/pynslcd.py, pynslcd/usermod.py: Handle user
	  modification requests in pynslcd

	  Similar to the nslcd implementation, this currently only covers
	  modifying the homeDirectory and loginShell attributes.

2013-03-30  Arthur de Jong <arthur@arthurdejong.org>

	* [f1895f9] nslcd/Makefile.am, nslcd/common.h, nslcd/nslcd.c,
	  nslcd/usermod.c: Handle user modification requests in nslcd

	  This is currently limited to supporting modification of the
	  homeDirectory and loginShell attributes.

	  Modifications as root currently use the rootpwmoddn and rootpwmodpw
	  options.

2013-03-30  Arthur de Jong <arthur@arthurdejong.org>

	* [8fb5eb1] nslcd.h: Define a NSLCD_ACTION_USERMOD request

	  The modification can either be requested by root or by the
	  user itself.

	  Modifications by the user should be done by connecting to the
	  LDAP server with the user-supplied credentials. It is expected
	  that access controls in the LDAP server prevent unwanted
	  modifications. The nslcd process is expected to check whether
	  supplied values are sensible.

2013-03-30  Arthur de Jong <arthur@arthurdejong.org>

	* [aae36cf] pynslcd/pam.py: Rename authentication function and
	  return connection

2013-03-30  Arthur de Jong <arthur@arthurdejong.org>

	* [355c2af] configure.ac: Fix test for absence of Python

2013-03-30  Arthur de Jong <arthur@arthurdejong.org>

	* [f478830] pynslcd/cfg.py: Mark unsupported pynslcd configuration
	  options

2013-03-30  Arthur de Jong <arthur@arthurdejong.org>

	* [2b097f7] configure.ac: Preset default configure values
	  consistently

2013-03-30  Arthur de Jong <arthur@arthurdejong.org>

	* [6ceb1df] configure.ac: Give an error when the Python interpreter
	  is missing

2013-03-29  Arthur de Jong <arthur@arthurdejong.org>

	* [a47b20f] configure.ac: Build command-line utilities by default
	  if Python is available

2013-03-29  Arthur de Jong <arthur@arthurdejong.org>

	* [adde1d4] : Implement clearing of nscd cache in pynslcd

2013-03-29  Arthur de Jong <arthur@arthurdejong.org>

	* [a75cfb9] pynslcd/nscd.py, pynslcd/search.py: Detect and handle
	  connection failure and recovery

	  Logs a connection recovery message and run a nscd cache
	  invalidation if configured.

2013-03-29  Arthur de Jong <arthur@arthurdejong.org>

	* [585d388] pynslcd/pynslcd.py: Start the nscd invalidator process
	  if needed

2013-03-09  Arthur de Jong <arthur@arthurdejong.org>

	* [d4c5c96] pynslcd/cfg.py: Parse the nscd_invalidate option

2013-03-29  Arthur de Jong <arthur@arthurdejong.org>

	* [11b1739] pynslcd/Makefile.am, pynslcd/nscd.py: Functionality
	  for clearing the nscd cache in pynslcd

2013-03-29  Arthur de Jong <arthur@arthurdejong.org>

	* [65a65ad] pynslcd/pynslcd.py: Switch to using os.environ instead
	  of os.putenv()

	  The os.putenv() call doesn't update os.environ and Python
	  documentation recommends using os.environ.

2013-03-29  Arthur de Jong <arthur@arthurdejong.org>

	* [46cf240] pynslcd/pam.py: Rename validate_request to validate

2013-03-29  Arthur de Jong <arthur@arthurdejong.org>

	* [7d1e492] pynslcd/pam.py: Also perform authentication search
	  using LDAPSearch class

2013-03-28  Arthur de Jong <arthur@arthurdejong.org>

	* [302c2fa] tests/test_nsscmds.sh: Make the NSS tests dependant
	  on the configuration of nsswitch.conf

2013-03-28  Arthur de Jong <arthur@arthurdejong.org>

	* [8790b40] tests/test_myldap.c: Do not rely on printf() being
	  able to print NULL strings

2013-03-24  Arthur de Jong <arthur@arthurdejong.org>

	* [932c641] man/nslcd.conf.5.xml: Fix manual page generation

2013-03-24  Arthur de Jong <arthur@arthurdejong.org>

	* [07ca836] nslcd/cfg.h: Fix comment for nss_nested_groups config
	  option

2013-03-24  Arthur de Jong <arthur@arthurdejong.org>

	* [3daa68d] : Implement support for nested groups

2013-03-24  Arthur de Jong <arthur@arthurdejong.org>

	* [642064c] tests/test.ldif, tests/test_nsscmds.sh: Add tests for
	  nested group functionality

	  This also includes some changes to the test directory contents
	  that were for other tests and functionality.

2013-03-24  Arthur de Jong <arthur@arthurdejong.org>

	* [b1b7648] README, man/nslcd.conf.5.xml, nslcd/cfg.c, nslcd/cfg.h,
	  nslcd/group.c, pynslcd/cfg.py, pynslcd/group.py: Implement a
	  nss_nested_groups configuration option

	  This option can be used in both nslcd and pynslcd to enable
	  recursive group member lookups. By default the functionality is
	  disabled. This also updates the documentation.

2013-03-24  Arthur de Jong <arthur@arthurdejong.org>

	* [d6a6e8b] pynslcd/common.py, pynslcd/group.py: Implement support
	  for nested groups in pynslcd

2013-03-24  Arthur de Jong <arthur@arthurdejong.org>

	* [41ba574] nslcd/group.c: Implement support for nested groups
	  in nslcd

	  This differs from the code provided by Steve Hill in that it avoids
	  (recursively) performing parallel LDAP searches by queueing groups
	  and check for extra members per queued group (in the forward
	  lookup) or check for extra parents (for the user to groups lookup).

	  For the reverse lookup handling the NSLCD_HANDLE macro could no
	  longer be used because extra care should be taken to free the
	  sets before returning and two search phases are needed.

2013-03-20  Steve Hill <steve@opendium.com>

	* [08f5301] AUTHORS, nslcd/group.c: Implement a
	  mkfilter_group_bymemberdn() function

	  This was part of a bigger change to implement nested groups,
	  however most of the other parts were re-implemented differently.

	  For the original changes, see:
	  http://lists.arthurdejong.org/nss-pam-ldapd-users/2013/msg00034.html

2013-03-24  Arthur de Jong <arthur@arthurdejong.org>

	* [edd119c] tests/test.ldif, tests/test.ldif.gz: Unpack the LDIF
	  file to make diffs clearer

2013-03-24  Arthur de Jong <arthur@arthurdejong.org>

	* [b0785de] nslcd/cfg.h, nslcd/myldap.c: spelling fixes

2013-03-22  Arthur de Jong <arthur@arthurdejong.org>

	* [402d3f3] nslcd/service.c: fix service request logging

2013-03-19  Jakub Hrozek <jhrozek@redhat.com>

	* [f21efd6] nss/common.h: NSS: Return TRYAGAIN on zero-length buffer

	  One of our customers was running into a situation where glibc
	  provided a zero buffer, which is a condition that is retriable
	  and the nss module should return NSS_STATUS_TRYAGAIN not
	  NSS_STATUS_UNAVAIL.

2013-03-11  Arthur de Jong <arthur@arthurdejong.org>

	* [7926326] nss/shadow.c: fix the text representation of shadow
	  information for nscd on Solaris

2013-03-11  Arthur de Jong <arthur@arthurdejong.org>

	* [83c5788] .gitignore, tests/Makefile.am, tests/lookup_shadow.c:
	  implement a lookup_shadow test command for use on systems that
	  don't allow querying shadow via getent

2013-03-10  Arthur de Jong <arthur@arthurdejong.org>

	* [fa27d94] nslcd/cfg.c, nslcd/nscd.c: fix a few compiler warnings

2013-03-10  Arthur de Jong <arthur@arthurdejong.org>

	* [0b5b4d1] configure.ac: guess the value for --with-pam-seclib-dir
	  if it is not specified

2013-03-10  Arthur de Jong <arthur@arthurdejong.org>

	* [24c565c] tests/test_pamcmds.sh: small portability fix in
	  test_pamcmds.sh

2013-03-10  Arthur de Jong <arthur@arthurdejong.org>

	* [6a92621] nslcd/service.c: only log protocol name if it is present

2013-03-10  Arthur de Jong <arthur@arthurdejong.org>

	* [f7c6771] compat/ldap_parse_passwordpolicy_control.c, configure.ac:
	  also support systems without bet_get_enum()

2013-03-09  Arthur de Jong <arthur@arthurdejong.org>

	* [ba5f39f] pynslcd/pynslcd.py: log hex value of action id to make
	  debugging easier

2013-03-09  Arthur de Jong <arthur@arthurdejong.org>

	* [11ca816] pynslcd/pam.py: ensure consistent naming of DN variables

2013-03-09  Arthur de Jong <arthur@arthurdejong.org>

	* [116d215] pynslcd/attmap.py, pynslcd/group.py,
	  pynslcd/netgroup.py, pynslcd/pam.py, pynslcd/search.py,
	  pynslcd/service.py, pynslcd/shadow.py: clean up imports and use
	  ldap.filter.escape_filter_chars() directly

2013-03-09  Arthur de Jong <arthur@arthurdejong.org>

	* [ac30060] pynslcd/pam.py, pynslcd/pynslcd.py, pynslcd/search.py:
	  move get_connection function to search module as Connection class
	  as subclass of ReconnectLDAPObject to automatically reconnect
	  to the LDAP server

2013-03-09  Arthur de Jong <arthur@arthurdejong.org>

	* [4e60340] pynslcd/Makefile.am, pynslcd/alias.py, pynslcd/common.py,
	  pynslcd/ether.py, pynslcd/group.py, pynslcd/host.py,
	  pynslcd/netgroup.py, pynslcd/network.py, pynslcd/pam.py,
	  pynslcd/passwd.py, pynslcd/protocol.py, pynslcd/rpc.py,
	  pynslcd/search.py, pynslcd/service.py, pynslcd/shadow.py: move
	  Search class to search module

2013-03-09  Arthur de Jong <arthur@arthurdejong.org>

	* [975ee2c] pynslcd/cfg.py: fix default logging configuration
	  setting in pynslcd

2013-03-09  Arthur de Jong <arthur@arthurdejong.org>

	* [8a67c9f] common/tio.c: fix the description of the
	  tio_time_remaining() function

2013-03-08  Arthur de Jong <arthur@arthurdejong.org>

	* [d19f1df] man/nslcd.conf.5.xml: document the nscd_invalidate option

2013-03-09  Arthur de Jong <arthur@arthurdejong.org>

	* [bf64710] nslcd/myldap.c, nslcd/nscd.c, nslcd/nslcd.c: start the
	  nscd invalidator and invalidate the nscd cache after reconnecting
	  to the LDAP server after failure

2013-03-08  Arthur de Jong <arthur@arthurdejong.org>

	* [d413a64] nslcd/cfg.c, nslcd/cfg.h: implement parsing of the
	  nscd_invalidate option

2013-03-09  Arthur de Jong <arthur@arthurdejong.org>

	* [008f8a9] configure.ac, nslcd/Makefile.am, nslcd/common.h,
	  nslcd/nscd.c, tests/Makefile.am: implement functionality to send
	  a cache invalidation signal to nscd

2013-03-09  Arthur de Jong <arthur@arthurdejong.org>

	* [9a6f5b2] nslcd/common.c, nslcd/common.h, nslcd/nslcd.c: move
	  signame() function to common.c to make it available to all modules

2013-03-03  Arthur de Jong <arthur@arthurdejong.org>

	* [646dfa8] man/nslcd.conf.5.xml: document the trimming expressions
	  in the nslcd.conf(5) manual page

2013-03-03  Arthur de Jong <arthur@arthurdejong.org>

	* [54a3dba] pynslcd/expr.py: support trimming expressions with
	  full shell glob matching in pynslcd

2013-03-03  Arthur de Jong <arthur@arthurdejong.org>

	* [8655355] tests/test_expr.c: add tests for trimming expressions

2013-01-04  Arthur de Jong <arthur@arthurdejong.org>

	* [6c05b76] common/expr.c: update the trimming expressions code
	  to follow the new coding style

2012-12-03  Thorsten Glaser <t.glaser@tarent.de>

	* [3731964] AUTHORS, common/expr.c: allow trimming expressions
	  with ${foo#bar} syntax in nslcd

2013-03-01  Arthur de Jong <arthur@arthurdejong.org>

	* [f56f926] nslcd/myldap.c, nslcd/myldap.h, nslcd/pam.c: return
	  the password policy bind information via PAM

2013-01-04  Arthur de Jong <arthur@arthurdejong.org>

	* [5fce062] compat/Makefile.am, compat/ldap_compat.h,
	  compat/ldap_passwordpolicy_err2txt.c, configure.ac: provide a
	  basic replacement implementation of ldap_passwordpolicy_err2txt()
	  for systems that don't have it

2013-01-04  Arthur de Jong <arthur@arthurdejong.org>

	* [37151df] compat/Makefile.am, compat/ldap_compat.h,
	  compat/ldap_parse_passwordpolicy_control.c, configure.ac: provide
	  a replacement implementation of ldap_parse_passwordpolicy_control()
	  for systems that don't have it

2013-03-01  Arthur de Jong <arthur@arthurdejong.org>

	* [1c2ab50] compat/ldap_compat.h, configure.ac, nslcd/myldap.c:
	  request and parse password policy controls when doing user
	  authentication in nslcd

2013-01-18  Arthur de Jong <arthur@arthurdejong.org>

	* [f2c49e6] nslcd/myldap.c: pass the session along to the do_bind()
	  function

2013-03-03  Arthur de Jong <arthur@arthurdejong.org>

	* [117327e] configure.ac: add some missing checks to the configure
	  script

2013-03-01  Arthur de Jong <arthur@arthurdejong.org>

	* [b4afe7c] nslcd/pam.c: log a more meaningful error in nslcd when
	  trying to authenticate as administrator when rootpwmoddn is not set

2013-03-01  Arthur de Jong <arthur@arthurdejong.org>

	* [31f9098] nslcd/common.h, nslcd/pam.c, nslcd/shadow.c: move
	  update_lastchange() function from shadow to pam code

2013-03-01  Arthur de Jong <arthur@arthurdejong.org>

	* [1a1bb07] utils/getent.py: move parsing to command line arguments
	  to main body

2013-02-28  Arthur de Jong <arthur@arthurdejong.org>

	* [38fb524] TODO: update TODO (setnetgrent() returns an error
	  since r1874)

2013-02-27  Arthur de Jong <arthur@arthurdejong.org>

	* [798820e] man/nslcd.conf.5.xml: include information about when
	  some of the options were added

2013-02-27  Arthur de Jong <arthur@arthurdejong.org>

	* [11283a5] nss/common.c: add missing include statement for NULL
	  definition

2013-02-23  Arthur de Jong <arthur@arthurdejong.org>

	* [12076c7] nslcd/nslcd.c, pynslcd/pynslcd.py: log version
	  information from the NSS module

2013-02-23  Arthur de Jong <arthur@arthurdejong.org>

	* [3155cdf] nss/common.c, nss/exports.freebsd, nss/exports.glibc,
	  nss/exports.solaris: define and export an _nss_ldap_version symbol

2013-02-23  Arthur de Jong <arthur@arthurdejong.org>

	* [61a3fce] pynslcd/ether.py: also search for alternative macAddress
	  representation in pynslcd

2013-02-12  Arthur de Jong <arthur@arthurdejong.org>

	* [a9aea20] nslcd/nslcd.c: extra sanity check to ensure not too
	  many file descriptors are open

2013-02-23  Arthur de Jong <arthur@arthurdejong.org>

	* [bfdf7cd] nslcd.h: clarify NSLCD_ACTION_SERVICE_* request
	  parameter description

2013-02-23  Arthur de Jong <arthur@arthurdejong.org>

	* [1c6d856] man/nslcd.conf.5.xml, nslcd/cfg.c, tests/test_common.c:
	  allow names with one character in default validnames option and
	  allow parentheses (taken from Fedora packages)

2013-02-23  Arthur de Jong <arthur@arthurdejong.org>

	* [d54243a] man/nslcd.conf.5.xml: document the log option

2013-02-23  Arthur de Jong <arthur@arthurdejong.org>

	* [c75599d] pynslcd/cfg.py, pynslcd/pynslcd.py: handle the log
	  configuration option in pynslcd

2013-02-23  Arthur de Jong <arthur@arthurdejong.org>

	* [efca5ca] nslcd/cfg.c, nslcd/log.c, nslcd/log.h, nslcd/nslcd.c:
	  handle the log configuration option in nslcd

2013-02-23  Arthur de Jong <arthur@arthurdejong.org>

	* [22be9b0] nslcd/log.c, nslcd/log.h: implement functions for
	  configuring alternative logging

2013-02-12  Arthur de Jong <arthur@arthurdejong.org>

	* [c12768a] man/getent.ldap.1.xml: fix docbook tag for file name

2013-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [60f1d85] Makefile.am: generate ChangeLog with git2cl

2013-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [ba93d8f] ChangeLog, ChangeLog-2012: archive 2012 changelog
	  messages into a year file including the change from Subversion

2013-01-28  Arthur de Jong <arthur@arthurdejong.org>

	* [91440f7] .gitignore, man/Makefile.am, man/getent.ldap.1.xml:
	  add getent.ldap(1) manual page

2013-01-28  Arthur de Jong <arthur@arthurdejong.org>

	* [ded7bd2] utils/Makefile.am, utils/cmdline.py, utils/getent.py,
	  utils/nslcd.py: implement a getent command to query nslcd while
	  bypassing NSS stack

2013-01-26  Arthur de Jong <arthur@arthurdejong.org>

	* [3117668] .gitignore, Makefile.am, configure.ac, utils/Makefile.am:
	  add an --enable-utils option to configure to build command-line
	  utilities

2013-01-09  Arthur de Jong <arthur@arthurdejong.org>

	* [7c01898] pynslcd/cache.py, pynslcd/common.py: disable pynslcd
	  cache for now

2013-01-27  Arthur de Jong <arthur@arthurdejong.org>

	* [b9395c8] nslcd.h, nslcd/common.h, nslcd/netgroup.c, nslcd/nslcd.c,
	  pynslcd/netgroup.py: implement a netgroup_all request

2013-01-18  Arthur de Jong <arthur@arthurdejong.org>

	* [0ae8e56] nslcd/nslcd.c: make checking dlsym() result a little
	  safer

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1925
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-18  Arthur de Jong <arthur@arthurdejong.org>

	* [fb5d587] compat/ldap_passwd_s.c: fix copyright year

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1924
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-18  Arthur de Jong <arthur@arthurdejong.org>

	* [16db596] common/tio.c: restructure timeout calculation in tio
	  to reduce the number of times gettimeofday() is called

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1923
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-18  Arthur de Jong <arthur@arthurdejong.org>

	* [b01cd22] nslcd/log.c: use pthreads thread-local storage as
	  fallback mechanism if compiler doesn't provide a keyword for TLS

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1922
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-18  Arthur de Jong <arthur@arthurdejong.org>

	* [d86497b] configure.ac, m4/ax_tls.m4, nslcd/log.c, nss/aliases.c,
	  nss/ethers.c, nss/group.c, nss/hosts.c, nss/netgroup.c,
	  nss/networks.c, nss/passwd.c, nss/protocols.c, nss/rpc.c,
	  nss/services.c, nss/shadow.c: use the AX_TLS macro to find
	  correct thread-local storage class compiler directive

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1921
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-18  Arthur de Jong <arthur@arthurdejong.org>

	* [fa62cd3] nslcd/cfg.c, nslcd/cfg.h: dump full nslcd configuration
	  at debug level on start-up

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1920
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-16  Arthur de Jong <arthur@arthurdejong.org>

	* [2765100] man/Makefile.am: fix the way manual pages are generated
	  and distributed

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1918
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-14  Arthur de Jong <arthur@arthurdejong.org>

	* [2caeef4] man/nslcd.conf.5.xml, nslcd/cfg.c, pynslcd/cfg.py,
	  tests/test_cfg.c: support children search scope for systems that
	  have it

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1917
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-14  Arthur de Jong <arthur@arthurdejong.org>

	* [4197ec3] pynslcd/cfg.py: fix parsing of scope option in pynslcd

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1916
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-14  Arthur de Jong <arthur@arthurdejong.org>

	* [5e0bb05] tests/test_tio.c: support systems without ETIME

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1915
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-14  Arthur de Jong <arthur@arthurdejong.org>

	* [b5b6c48] configure.ac, tests/lookup_netgroup.c: check whether
	  setnetgrent() returns int or void (for FreeBSD)

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1914
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-12  Arthur de Jong <arthur@arthurdejong.org>

	* [0a5ac8b] nslcd/cfg.c, tests/test_cfg.c: reorganise configuration
	  file parsing code

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1913
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-12  Arthur de Jong <arthur@arthurdejong.org>

	* [82b31fe] nslcd/myldap.c: have myldap_get_ranged_values() return
	  a list of values instead of a set

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1912
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-12  Arthur de Jong <arthur@arthurdejong.org>

	* [388821a] nslcd/cfg.c, nslcd/group.c, nslcd/passwd.c,
	  nslcd/shadow.c: check result of set_tolist() to ensure that
	  memory allocation problems are logged

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1911
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-12  Arthur de Jong <arthur@arthurdejong.org>

	* [cdae946] nslcd/myldap.c: fix memory leak in
	  myldap_get_values_len() when using ranged attributes (very
	  unlikely to occur)

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1910
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-12  Arthur de Jong <arthur@arthurdejong.org>

	* [9b11d41] nslcd/myldap.c: fix a problem in memory handling in
	  myldap_get_values_len() if malloc() would fail

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1909
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-12  Arthur de Jong <arthur@arthurdejong.org>

	* [2a73fa1] configure.ac: drop -Wcase-qual when using
	  --enable-warnings because it was causing too much noise

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1908
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-10  Arthur de Jong <arthur@arthurdejong.org>

	* [4689d5f] nslcd/myldap.c: fix typo in comment

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1906
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-06  Arthur de Jong <arthur@arthurdejong.org>

	* [eb86f87] pynslcd/pam.py: request and parse password policy
	  controls when doing user authentication in pynslcd

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1905
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-06  Arthur de Jong <arthur@arthurdejong.org>

	* [28aeaa4] pam/pam.c: do not recheck the user password in first
	  password phase if it was stored in the authentication phase

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1904
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-06  Arthur de Jong <arthur@arthurdejong.org>

	* [ba18be7] nslcd/pam.c: perform search for pam_authz_search on
	  all search bases

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1903
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [65e184d] pynslcd/pam.py: some simplifications in the current
	  pynslcd PAM request handling

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1902
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [8d054c8] nslcd/myldap.c, tests/test_cfg.c: update FIXMEs

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1901
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [086a1a5] nslcd/ether.c: change ethernet address formatting from
	  FIXME to note

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1900
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [c89c41b] pam/pam.c: save the old password if either the
	  authentication or the authorisation response is NEW_AUTHTOK_REQD

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1899
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [33518d5] nslcd/myldap.c: inline most is_valid_...() functions

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1898
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [5242233] compat/ldap_initialize.c: remove not needed define

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1897
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-05  Arthur de Jong <arthur@arthurdejong.org>

	* [7a2b63f] common/nslcd-prot.h: log hex values when debugging
	  the protocol

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1896
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-01  Arthur de Jong <arthur@arthurdejong.org>

	* [82010e2] nslcd/myldap.c, nslcd/myldap.h, nslcd/pam.c: log and
	  return a diagnostic message instead of just the LDAP error on
	  password change failure

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1895
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-01  Arthur de Jong <arthur@arthurdejong.org>

	* [2f6f6a2] nslcd/pam.c: retry updating the lastChange attribute
	  with the normal nslcd LDAP connection if the update with the
	  user's connection failed

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1894
	  ef36b2f9-881f-0410-afb5-c4e39611909c

2013-01-01  Arthur de Jong <arthur@arthurdejong.org>

	* [864c522] pynslcd/pam.py: update pynslcd PAM protocol handling
	  to be in line with r1865

	  git-svn-id:
	  http://arthurdejong.org/svn/nss-pam-ldapd/nss-pam-ldapd@1893
	  ef36b2f9-881f-0410-afb5-c4e39611909c