# This is the configuration file for the LDAP nameservice
# switch library.

# The uri pointing to the LDAP server to use for name lookups.
# Mulitple entries may be specified, each separated by a
# space. The address that is used here should be resolvable
# without using LDAP (obviously).
#uri ldap://127.0.0.1/
#uri ldaps://127.0.0.1/
#uri ldapi://%2fvar%2frun%2fldapi_sock/
# Note: %2f encodes the '/' used as directory separator
uri ldap://127.0.0.1/

# The distinguished name of the search base.
base dc=example,dc=net

# The LDAP version to use (defaults to 3
# if supported by client library)
#ldap_version 3

# The distinguished name to bind to the server with.
# Optional: default is to bind anonymously.
# Please do not put double quotes around it as they
# would be included literally.
#binddn cn=proxyuser,dc=padl,dc=com

# The credentials to bind with.
# Optional: default is no credential.
#bindpw secret

# The distinguished name to bind to the server with
# if the effective user ID is root. Password is
# stored in /etc/ldap.secret (mode 600)
# Use 'echo -n "mypassword" > /etc/ldap.secret' instead
# of an editor to create the file.
#rootbinddn cn=manager,dc=padl,dc=com

# The search scope.
#scope sub
#scope one
#scope base

# Search timelimit
#timelimit 30

# Bind/connect timelimit
#bind_timelimit 30

# Reconnect policy:
#  hard_open: reconnect to DSA with exponential backoff if
#             opening connection failed
#  hard_init: reconnect to DSA with exponential backoff if
#             initializing connection failed
#  hard:      alias for hard_open
#  soft:      return immediately on server failure
#bind_policy hard

# Connection policy:
#  persist:   DSA connections are kept open (default)
#  oneshot:   DSA connections destroyed after request
#nss_connect_policy persist

# Idle timelimit; client will close connections
# (nss_ldap only) if the server has not been contacted
# for the number of seconds specified below.
#idle_timelimit 3600

# Use paged rseults
#nss_paged_results yes

# Pagesize: when paged results enable, used to set the
# pagesize to a custom value
#pagesize 1000

# Use backlinks for answering initgroups()
#nss_initgroups backlink

# Enable support for RFC2307bis (distinguished names in group
# members)
#nss_schema rfc2307bis

# RFC2307bis naming contexts
# Syntax:
# nss_base_XXX          base?scope?filter
# where scope is {base,one,sub}
# and filter is a filter to be &'d with the
# default filter.
# You can omit the suffix eg:
# nss_base_passwd       ou=People,
# to append the default base DN but this
# may incur a small performance impact.
#nss_base_passwd        ou=People,dc=padl,dc=com?one
#nss_base_shadow        ou=People,dc=padl,dc=com?one
#nss_base_group         ou=Group,dc=padl,dc=com?one
#nss_base_hosts         ou=Hosts,dc=padl,dc=com?one
#nss_base_services      ou=Services,dc=padl,dc=com?one
#nss_base_networks      ou=Networks,dc=padl,dc=com?one
#nss_base_protocols     ou=Protocols,dc=padl,dc=com?one
#nss_base_rpc           ou=Rpc,dc=padl,dc=com?one
#nss_base_ethers        ou=Ethers,dc=padl,dc=com?one
#nss_base_netmasks      ou=Networks,dc=padl,dc=com?ne
#nss_base_bootparams    ou=Ethers,dc=padl,dc=com?one
#nss_base_aliases       ou=Aliases,dc=padl,dc=com?one
#nss_base_netgroup      ou=Netgroup,dc=padl,dc=com?one

# attribute/objectclass mapping
# Syntax:
#nss_map_attribute      rfc2307attribute        mapped_attribute
#nss_map_objectclass    rfc2307objectclass      mapped_objectclass

# configure --enable-nds is no longer supported.
# NDS mappings
#nss_map_attribute uniqueMember member

# Services for UNIX 3.5 mappings
#nss_map_objectclass posixAccount User
#nss_map_objectclass shadowAccount User
#nss_map_attribute uid msSFU30Name
#nss_map_attribute uniqueMember msSFU30PosixMember
#nss_map_attribute userPassword msSFU30Password
#nss_map_attribute homeDirectory msSFU30HomeDirectory
#nss_map_attribute homeDirectory msSFUHomeDirectory
#nss_map_objectclass posixGroup Group

# Services for UNIX 2.0 mappings
#nss_map_objectclass posixAccount User
#nss_map_objectclass shadowAccount user
#nss_map_attribute uid msSFUName
#nss_map_attribute uniqueMember posixMember
#nss_map_attribute userPassword msSFUPassword
#nss_map_attribute homeDirectory msSFUHomeDirectory
#nss_map_attribute shadowLastChange pwdLastSet
#nss_map_objectclass posixGroup Group
#nss_map_attribute cn msSFUName

# RFC 2307 (AD) mappings
#nss_map_objectclass posixAccount user
#nss_map_objectclass shadowAccount user
#nss_map_attribute uid sAMAccountName
#nss_map_attribute gecos name
#nss_map_attribute homeDirectory unixHomeDirectory
#nss_map_attribute shadowLastChange pwdLastSet
#nss_map_objectclass posixGroup group
#nss_map_attribute uniqueMember member

# AuthPassword mappings
#nss_map_attribute userPassword authPassword

# AIX SecureWay mappings
#nss_map_objectclass posixAccount aixAccount
#nss_base_passwd ou=aixaccount,?one
#nss_map_attribute uid userName
#nss_map_attribute gidNumber gid
#nss_map_attribute uidNumber uid
#nss_map_attribute userPassword passwordChar
#nss_map_objectclass posixGroup aixAccessGroup
#nss_base_group ou=aixgroup,?one
#nss_map_attribute cn groupName
#nss_map_attribute uniqueMember member

# Netscape SDK LDAPS
#ssl on

# Netscape SDK SSL options
#sslpath /etc/ssl/certs

# OpenLDAP SSL mechanism
# start_tls mechanism uses the normal LDAP port, LDAPS typically 636
#ssl start_tls
#ssl on

# OpenLDAP SSL options
# Require and verify server certificate (yes/no)
# Default is to use libldap's default behavior, which can be configured in
# /etc/openldap/ldap.conf using the TLS_REQCERT setting.  The default for
# OpenLDAP 2.0 and earlier is "no", for 2.1 and later is "yes".
#tls_checkpeer yes

# CA certificates for server certificate verification
# At least one of these are required if tls_checkpeer is "yes"
#tls_cacertfile /etc/ssl/ca.cert
#tls_cacertdir /etc/ssl/certs

# Seed the PRNG if /dev/urandom is not provided
#tls_randfile /var/run/egd-pool

# SSL cipher suite
# See man ciphers for syntax
#tls_ciphers TLSv1

# Client certificate and key
# Use these, if your server requires client authentication.
#tls_cert
#tls_key

# Disable SASL security layers. This is needed for AD.
#sasl_secprops maxssf=0

# Override the default Kerberos ticket cache location.
#krb5_ccname FILE:/etc/.ldapcache